Pro Boat SunDancer - User Manual

INSTRUCTION MANUAL
SunDancer
™
RTR Boat
Specifications:
Length: .................................................................................................................... 25 in (635 mm)
Width: .................................................................................................................... 8.5 in (216 mm)
Radio: .............................................................................. JR Python AM radio system with ESC
Motor: .............................................................................................................. 550 electric motor
Thank you for purchasing the Pro Boat Ready-To-Run
SunDancer. Please read these instructions carefully before
attempting to operate your boat.
The SunDancer comes Ready-to-Run with the JR
®
Python
AM radio system and electronic speed controller already
installed. All assembly and building is taken care of at the
factory, allowing you to quickly get your boat running.
You will need to purchase the following to get your boat on
the water:
• 8 “AA” alkaline batteries for the radio transmitter
• 7.2V Ni-Cd Battery Pack with Tamiya Connector (DYN1000)
• Ni-Cd Battery Fast Charger (DYN4010)

Summary

Boat Setup and Operation

Inspection and Battery Setup

Inspect the boat for damage and install the transmitter and boat batteries.

Radio Check and Water Testing

Verify radio system operation and test the boat's performance in the water.

Routine Maintenance

Perform checks on screws and propeller before and after each run, and rinse if used in salt water.

Pro Boat SunDancer Specifications

General

Brand	Pro Boat
Model	SunDancer
Category	Toy
Language	English