15
56713B/K2079B
Revised
2.19.15
spring plate will need to be drilled out to
accommodate the new larger U-bolts.
11. Repeat the installation on the other side
of the vehicle.
12.When the installation of the remaining
side is complete, torque the U-bolts to 85 ft.
lbs.
13.Install your new Pro Comp shocks
(929543, MX6100 or ZX2001) and torque
this hardware to 60 ft./lbs.
14.Reinstall the wheels and tires and lower
the vehicle to the ground.
15.Recheck the wheel lug torque on all four
wheels at this time.
16.Recheck all hardware for proper installa-
tion and torque at this time.
17.After test driving: If there is a rear drive
line vibration you can install shim kit 51255
with hardware pack 90-6327. Try various
combinations until the vibration is eliminated.
ILLUSTRATION B
95-300D
13-90330 or
13-90328
20-65471 or
20-65302
To Next Page
Loading...