Need help?Do you have a question about the Pro-face GP-4601T and is the answer not in the manual?
General| Display Size | 10.4 inches |
|---|---|
| Brightness | 400 cd/m² |
| Power Supply | 24 VDC |
| Backlight | LED |
| Backlight Life | 50, 000 hours |
| Touch Panel Resolution | 1024 x 1024 |
| Memory (RAM) | 128 MB |
| Memory (Flash) | 128 MB |
| Protection Rating | IP65 |
| Display Colors | 65, 536 colors |
| Display Type | TFT |
| Touch Panel Type | Analog Resistive |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | -20 to 60 °C |
| Serial Interface | RS-232C/422/485 |
| Ethernet | 10/100BASE-TX |
| USB | USB 2.0 |
| Relative Humidity | 10 to 90% (non-condensing) |
| CPU | RISC |
| Power Consumption | 24W |
| Shock Resistance | 147 m/s², 3 times each in X, Y, Z directions |
| Resolution | 800 x 600 pixels (SVGA) |
Overview of the manual's structure and content.
Defines the manual's purpose: describing GP unit usage.
Specifies the document's validity based on GP-Pro EX software version.
Lists downloadable technical publications and information from the website.
Contains critical warnings about expertise needed for system design and operation.
Details the items included in the GP unit packaging.
Lists product certifications, agency approvals, and compliance standards.
Discusses critical systems, alarms, and handling requirements for GP units.
Outlines the equipment that can be connected to the GP unit.
Lists and describes various accessories available for the GP unit.
Identifies and describes the parts of the GP-4200 Series units.
Identifies and describes the parts of the GP-4300 Series units.
Identifies and describes the parts of the GP-4400 Series units.
Identifies and describes the parts of the GP-4500 Series units.
Identifies and describes the parts of the GP-4600 Series units.
Details the specifications for the GP-4200 Series, including electrical and dimensional data.
Details the specifications for the GP-4300 Series, including electrical and dimensional data.
Details the specifications for the GP-4400 Series, including electrical and dimensional data.
Details the specifications for the GP-4500 Series, including electrical and dimensional data.
Details the specifications for the GP-4600 Series, including electrical and dimensional data.
Provides instructions and requirements for mounting the GP unit into a panel.
Explains the principles for connecting power cords and grounding the GP unit.
Details the procedure for safely inserting and removing SD cards from the GP unit.
Explains how to attach USB cable clamps to secure USB connections.
Provides instructions on how to clean the GP unit's display and frame.
Guides on how to replace the installation gasket for dust and moisture protection.
Lists checks for operation environment and electrical specifications.
Details the procedure for replacing the internal battery for data backup.
Lists the items included with the rear mount model packaging.
Lists product certifications and compliance standards for rear mount models.
Details optional items and maintenance options for rear mount models.
Identifies and describes the parts of the rear mount models.
Provides structural specifications relevant to rear mount models.
Presents dimensional drawings and measurements for rear mount models.
Explains the installation methods for rear mount models.
To Next Page