Pro-face GP-577R Series Guide Book

(1) Connect your PC and GP/ST-3500 series with a USB transfer cable.
If the driver of the cable has not been installed on your PC yet, a dialog box will
appear. Please follow the instructions.
NOTE
・ The “Hardware Installation” dialog box as shown below may appear during
installing the USB driver depending on the security level of Windows® XP. Click
[Continue Anyway] to start installing the driver. When installation is
completed, click [Finish].
・ If the following symptoms appear on Microsoft Windows® 7, go to updating
“USB Data Transfer Driver” on [OtasukePro!] for download.
(http://www.pro-face.com/otasuke/download/freesoft/gpproex_transfer.htm
)
- An error occurs when GP-Pro EX or Transfer Tool is installed
- An error occurs when data is transferred via a USB transfer cable
(model: CA3-USBCB-01).
26/49

Pro-face GP-577R Series Specifications

General

Brand	Pro-face
Model	GP-577R Series
Category	Touch Panel
Language	English