Need help?Do you have a question about the Pro-face GP-4301TW and is the answer not in the manual?
General| Display Size | 10.4 inches |
|---|---|
| Display Type | TFT LCD |
| Display Colors | 65, 536 colors |
| Brightness | 400 cd/m² |
| Ethernet | 10BASE-T/100BASE-TX |
| Power Supply | 24 VDC |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | -20 to 60 °C |
| Protection Rating | IP65 |
| Touch Panel Type | Resistive |
| Processor | RISC CPU |
| Serial Interface | RS-232C/422/485 |
| USB | USB 2.0 |
Introduces procedures to replace GP-2300 series units with GP-4301T/TW units.
Explains how GP4000 series model numbers differ based on specifications before ordering.
Compares specifications for GP-2300T/S and GP-4301T models, covering display, memory, and interfaces.
Compares specifications for GP-2300L and GP-4301TW models, including display, memory, and interfaces.
Compares specifications for GP-2301T/S/L and GP-4301TW models, detailing display, memory, and interfaces.
Details the physical connector locations on GP-2300 and GP-4301T/TW series units.
Explains the analog touch panel type of GP-4301T/TW and its 2-point touch input behavior.
Discusses display color changes from monochrome to color upon replacement and conversion settings.
Lists USB transfer cables compatible with GP-4301T/TW and notes incompatible GP-2300 series cables.
Highlights differences in serial interface pin assignments between GP-2300 and GP-4301T/TW.
States GP-4301T/TW lacks a CF card slot; recommends SD card or USB flash drive for data.
Covers barcode reader and printer connections, noting missing tool port and parallel interface.
Notes incompatibility of GP-2300 expansion units and isolation units; suggests alternatives.
Informs about the spring lock type power connector on GP-4301T/TW and the need for a new power cable.
Explains GP-4301T uses replaceable primary batteries, unlike GP-2300's rechargeable ones.
Compares power consumption between GP-2300 series (22W or less) and GP-4301T/TW (10.5W or less).
Details the materials and colors of the GP-2300 series (Silver Aluminum alloy) and GP-4301T/TW (Light Gray Resin).
Highlights reduced SRAM size when replacing GP-2300L with GP-4301TW and how to check SRAM size.
Outlines the steps for installation, screen data handling, and communication during replacement.
Lists prerequisites for receiving and converting screen data, including software and transfer cables.
Explains how to receive screen data from GP-2300 series using transfer cables via GP-PRO/PBIII.
Details the process of converting GP-2300 series project files (*.prw) to GP-Pro EX format (*.prx).
Guides on changing the display unit type to GP-4301TW in GP-Pro EX after conversion.
Explains how to transfer converted project data to GP-4301T/TW using USB transfer cables.
Lists differences in software features and compatibility after converting from GP-PRO/PBIII to GP-Pro EX.
Mentions that more connectable drivers will be added and provides a link for supported devices.
Illustrates the physical shapes of COM ports for GP-2300 and GP-4301T/TW series.
Details pin assignments and signal names for COM1 ports on GP-2300 series (RS-232C/422).
Lists pin assignments and signal meanings for the RS-232C COM1 port on GP-4301T/TW.
Provides signal details for COM2 ports on GP-2300T/S/L (RS-232C) and GP-4301T/TW (RS-422/485).
Discusses multi-link connection limitations for GP-4301T/TW via RS-422 and serial multi-link driver support.
States that the internal 2-Port feature for Mitsubishi PLC is not usable on GP-4501TW.
Explains cable diagrams for replacement, noting precautions and restrictions.
Shows system configurations for GP-2300 and GP-4301T/TW using RS-232C and lists a required conversion cable.
Advises selecting 'VCC' in Device/PLC Setting for Mitsubishi PLC CPU I/F cables to ensure proper communication.
Illustrates the system configuration for GP-2300T/S/L using COM2, noting the same cable can be used for replacement.
Shows system configurations for GP-2300 and GP-4301T/TW using RS-422 and specifies a conversion cable and port setting.
Recommends replacing terminal block adapters with a specific conversion adapter for GP-4301T/TW.
Explains how to handle CF card replacement with SD card or USB storage when using GP-Pro EX.
Provides a step-by-step procedure to change the SD card setting to USB storage in GP-Pro EX.
Details how to check and change the destination folder setting for external media in GP-Pro EX.
To Next Page
