Pro-face GP-4301TW - CPU I;F Cable for Mitsubishi PLC

When using CPU I/F Cable for Mitsubishi PLC…
When using CPU I/F Cables for Mitsubishi PLC (GP430-IP10-O/ GP430-IP11-O)
with GP-2300 series, be sure to select “VCC” in the Device/PLC Setting on GP-Pro
EX after converting a project file, or the communication will not work properly.
To change this setting, select [System Settings] -> [Device/PLC] in the [Project]
menu on GP-Pro EX.
53/59