4.6 Cable Diagram at the time of replacement
The connection cable for GP-2300 series can be used for GP-4301T/TW.
But please note that there are precautions and restrictions as described below.
IMPORTANT
・ Please check the connection configurations GP-4301T/TW supports with GP-Pro
EX Device/PLC Connection Manual before using a connection cable.
(http://www.pro-face.com/otasuke/files/manual/gpproex/new/device/index.ht
m)
・ The Siemens MPI connection cable cannot be used.
Please refer to the above-mentioned GP-Pro EX Device/PLC Connection Manual
and prepare a connection cable for GP-4301T/TW newly.
51/59
To Next Page
Loading...
