EasyManua.ls Logo

Pro Force PWF0102000.03 User Manual

Pro Force PWF0102000.03
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PWF0102000.03
Operator Manual
Manuel de L’opérateur
Manual del operador
pro-forceproducts.com 101-3162 3/1/11
DO NOT RETURN TO
STORE!
CALL US FIRST!
CUSTOMER HOTLINE
1-888-895-4549
FOR QUESTIONS OR
SERVICE INFORMATION
STOP
NE PAS RETOURNER AU
MAGASIN!
APPELEZ–NOUS D’ABORD!
ASSISTANCE TELEPHONIQUE
A LA CLIENTELE
1-888-895-4549
POUR L'INFORMATION DE
QUESTIONS OU SERVICE
NO LO DEVUELVA A LA
TIENDA!
¡PRIMERO LLÁMENOS!
LÍNEA DIRECTA DE ATENCIÓN
AL CLIENTE
1-888-895-4549
PARA la INFORMACION de
PREGUNTAS O SERVICIO
ARRÊT
A L T O
IMPORTANT - Please make
certain that everyone who uses
the Pro Force® Pressure Washer
thoroughly reads and under-
stands these instructions prior to
operation.
IMPORTANT - Veiller à ce que
toute personne amenée à utiliser cet
appareil de Pro Force® lise soi-
gneusement ces instructions et les
comprenne avant de procéder à son
utilisation.
IMPORTANTE - Favor de
ceciorarse de que toda persona
que use el Lavador de presión
Pro Force® lea y entienda todas
las instrucciones antes de la
operación.
®
Question and Answer IconNeed help?

Do you have a question about the Pro Force PWF0102000.03 and is the answer not in the manual?

Pro Force PWF0102000.03 Specifications

General IconGeneral
BrandPro Force
ModelPWF0102000.03
CategoryPressure Washer
LanguageEnglish

Summary

Customer Service and Safety

Safety Symbols and Warnings

Explains the meaning of DANGER, WARNING, CAUTION, and NOTE symbols used throughout the manual.

Safety Features

Thermal Relief Valve

Protects the pump from overheating if the spray gun is closed for an extended time or nozzle becomes plugged.

Safety Lock Off Latch

Prevents accidental discharge of high-pressure water by engaging the safety latch on the trigger when not in use.

Low-Oil Shutdown

Automatically shuts off the engine if the oil level drops below the required minimum, protecting the engine.

Before Operation Procedures

Pre-Start Preparation

Check for loose or missing parts and any damage that may have occurred during shipment before starting.

Lubrication Requirements

Ensure the engine crankcase is filled with the proper amount and type of oil before starting the engine.

Operating Instructions

Start-Up Procedure

Steps to ensure water supply is connected, release safety lock, and purge air from the hose before operation.

Starting the Engine

Instructions for checking fluid levels, adjusting choke, setting the engine switch, and pulling the starter rope.

Storage and Warranty Information

Limited Warranty Coverage

Details MAT Industries' warranty, including coverage, exclusions, and the warranty period.

Troubleshooting Guide