Pro-Ject Audio Systems A1 - General Information; Controls, features and connections; In the packaging

© Pro-Ject Audio Systems · Pro-Ject A1 · Revision 2022.01.05
3
GENERAL INFORMATION
Controls, features and connections
1 PLATTER
2 CHASSIS
3 FIXED COUNTERWEIGHT
4 TONEARM TUBE
5 HEADSHELL WITH FINGER LIFT AND PRE-MOUNTED ORTOFON CARTRIDGE
6 TONEARM REST / REMOVABLE TRANSPORT TWIST TIE
7 REPLAY SPEED LEVER
8 TONEARM LIFT LEVER
9 START/STOP LEVER
10 PHONO PREAMP ON/OFF SWITCH
11 DUSTCOVER HINGE HOLDERS
12 FELTMAT
13 RCA CABLE WITH EARTHING WIRE
14 POWER SUPPLY SOCKET
In the packaging
a TURNTABLE
a.1/a.2 FIXED RCA CABLE (a.1) WITH EARTHING WIRE (a.2)
b FELTMAT
c DUSTCOVER
d SINGLES ADAPTER
e POWER SUPPLY
f DUSTCOVER HINGES
g PLATTER PROTECTION CARDBOARD
h TONEARM TWIST TIE
i STYLUS PROTECTION COVER
j SETUP GUIDE AND TRANSLATION MATRIX (not pictured below)
a
g
b
d
b
c
e
f
h
i