Pro-Ject Audio Systems VC-E2 - Pro-Ject VC-E2 Controls, Features, and Connections; Controls, Features and Connections; Accessories (Included, but not shown above)

7 pages

To Next Page

To Previous Page

Pro-Ject VC-E2

Controls, features and connections

1 Vacuum arm* (adhesive velvet strips attached)

2 Platter*

3 Fixing screw *

4 Ventilation outlet

5 Main switch with mains power cord socket

6 Vacuum on/off switch

7 Motor on/off direction switch

8 Motor shaft bushing

9 Magnetic clamp*

10 Cover for ventilation outlet

11 Motor shaft

12 Vacuum arm flange

13 2x pre-drilled holes for fixing of cover of ventilation outlet

Accessories (included, but not shown above)

1 Wash it 2 vinyl cleaning fluid, 100ml bottle*

2 Goat hair brush*

3 Replacement adhesive strips for vacuum arm*

4 AC power cord*

5 2x Washers for setting height of the platter*