EasyManua.ls Logo

Pro-Logix SOLAR PL3760 - User Manual

Pro-Logix SOLAR PL3760
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SOLAR PL3760
Operator’s Manual
Failure to follow instructions may cause
damage or explosion, always shield eyes.
Read entire instruction manual before use.
WARNING
Includes information on SOLAR Model No. PL3760
Part No. 141-396-000
Warning: This product can expose you to chemicals,
including Vinyl-Chloride, Styrene and Acrylonitrile, which
are known to the State of California to cause cancer.
For more information go to www.P65Warnings.ca.gov
Question and Answer IconNeed help?

Do you have a question about the Pro-Logix SOLAR PL3760 and is the answer not in the manual?

Summary

Safety Summary

Important Safety Instructions & Saving Guide

Key safety instructions and advice on retaining the manual for future reference.

Shock Hazards

Risk of Explosive Gases

Battery Explosion Hazards

Moving Parts Hazards

Burn Hazards

Personal Precautions

Introduction

Product Description

Overview of the battery charger's design, features, and capabilities.

How Batteries Charge

Explanation of the charging process and how batteries draw current.

Stable Power Mode Functions

Details on the operation and purpose of the stable power mode.

Spark Prevention

Important precautions to avoid sparks and ignition of explosive gases.

Assembly

Assemble the Handle

Step-by-step instructions for attaching the charger's handle.

Preparation

Charger Placement

Guidelines for selecting a suitable and safe location for the charger.

Provide Required Power

Information on the necessary AC power source and requirements.

Extension Cords

Advice on selecting and using extension cords safely.

Battery Preparation

Steps for preparing a battery before charging, including topping off.

Controls and Indicators

Mode Selection Button

Explanation of the button used to change the charger's operating mode.

Supply (Stable Power) Control Buttons

Buttons for controlling voltage in stable power mode.

Charge Control Buttons

Buttons for setting battery type, voltage, and charge rate.

Start Button

Button to commence or discontinue charging and other functions.

Charging Operation

Choosing a Charging Rate

Guidelines for selecting an appropriate charging rate based on battery type.

Choosing a Battery Type Setting

How to select the correct battery type for optimal charging.

Pre-Charge Battery Activation

Information on charging deeply discharged batteries.

Operation

Connecting to Batteries Installed in Vehicles

Instructions for connecting the charger to a vehicle's battery.

Connecting to Batteries Outside a Vehicle

Instructions for connecting the charger to a battery not in a vehicle.

Charging Mode Operation

Choosing Battery Type and Charging Rate

Steps for setting battery type and charge rate before charging.

Starting and Completing Charge

How to initiate, monitor, and complete the charging process.

Stable Power Mode Operation

Setting System Voltage

How to select and set the desired system voltage for stable power mode.

Initiating and Exiting Stable Power Mode

Steps to start, maintain, and stop the stable power function.

Engine Starting

Jump Starting Procedure

Instructions for using the charger to start a vehicle with a weak battery.

Charging Amp Settings Overview

Table showing voltage, charging rate, power supply, and engine start settings.

Maintenance

Cleaning and Inspection

Procedures for cleaning and inspecting the charger after use.

Moving and Storage Guidelines

Advice on safely moving and storing the battery charger unit.

Troubleshooting

No Display or LEDs

Steps to resolve issues when the display and LEDs are not lit.

Display Reads 0.0 V

How to address issues when the voltage display shows zero.

Unit Reduces Output Unexpectedly

Troubleshooting for when the charger output is reduced without cause.

Battery Does Not Accept Charge

Steps to diagnose why a battery is not accepting a charge.

Vehicle Will Not Start in Engine Start Mode

Steps to troubleshoot engine start mode failures.

Limited Warranty

Warranty Terms and Conditions

Details on the warranty coverage, limitations, and duration.

Obtaining Service Under Warranty

Instructions on how to get service for the product.

Registering Your Purchase

Information on how to register the product for updates and service.

Pro-Logix SOLAR PL3760 Specifications

General IconGeneral
BrandPro-Logix
ModelSOLAR PL3760
CategoryRemote Starter
LanguageEnglish

Related product manuals