EasyManua.ls Logo

PRO-PULSE N1F-GT-250/3.0-C - User Manual

PRO-PULSE N1F-GT-250/3.0-C
21 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Modèle / Model
:
CONSERVEZ CE GUIDE
Vous aurez besoin de ce guide pour les règles de sécurité, le fonctionnement et la garantie.
Conservez-le dans un endroit sûr et sec.
SAVE THIS MANUAL
You will need this manual for safety instructions, operating procedures, and warranty.
Put it and the original sales invoice in a safe, dry place for future reference.
QUESTIONS? 1-866-206-0888
59595036
N1F-GT-250/3.0-C
Coupe-herbe électrique
Manuel de l’utilisateur (p.2)
Electric grass trimmer
Operator’s Manual (p.12)
Notre personnel du service à la clientèle est disponible
pour vous aider.
Pour obtenir de l’aide pour le montage de votre produit,
pour signaler des pièces endommagées ou manquantes,
ou pour toute autre information, veuillez composer notre
numéro sans frais : 1-866-206-0888.
Our Customer service staff is available to help you.
For help with product assembly, to report damaged or
missing parts, or for any other information, please call
our toll-free number: 1-866-206-0888.

Table of Contents

Questions and Answers

  • B
    blakemarkAug 9, 2025
    What to do if the PRO-PULSE N1F-GT-250/3.0-C Trimmer spool head will not advance line?
    • C
      Calvin SanchezAug 10, 2025
      If the spool head on your PRO-PULSE Trimmer isn't advancing the line, here's what you can do: * Stop the unit and clean any accumulated grass from the cutting head. * If the string head is out of line, refill it with a new line. * If the spool is bound up, replace it. * Clean the spool and spool housing if the string head is dirty. * If the line was twisted when refilled, disassemble and rewind it. * If not enough line is exposed, push the bump knob and pull out the line until it extends beyond the string head.
  • L
    lleonAug 26, 2025
    Why PRO-PULSE Trimmer motor operates intermittently?
    • B
      brownandreaAug 26, 2025
      If your PRO-PULSE Trimmer motor is operating intermittently, it could be due to a few reasons: * A loose connection in the extension cord. Make sure the cord is securely connected. * The spool housing may not be rotating freely. Carefully clean the spool housing. * There might be an electrical failure.

PRO-PULSE N1F-GT-250/3.0-C Specifications

General IconGeneral
BrandPRO-PULSE
ModelN1F-GT-250/3.0-C
CategoryTrimmer
LanguageEnglish