4
4. Maintenance
4.1 Before further use, safety devices or slightly damaged parts must be
carefullycheckedforerror‐freeandintendedoperation.
4.2Inspect movingparts forerror‐freeoperationandthatthey don’tbind,
orwhetheranypartsaredamaged.
4.3 Damaged safety devices and parts must be repaired
or replaced by a
qualified technician, so long as nothing else is indicated in the operation
manual.
4.4 Use only accessories or attachments which are listed in the operation
manual. Use of other tools and other accessories can lead to a danger of
injury.
5. Keepchildrenatadistance
Warning:
this appliance is not intended for use by young children and
infirm persons unless they have been adequately supervised by a
responsiblepersontoensurethattheycanusetheappliancesafely.
Warning: Young children should be supervised to ensure that they do not
playwiththeappliance.
Unuseddesoldering
stationshouldbestoredinadrylocationwhichisoutof
thereachofchildren.Swit choffallunuseddesolderingstation.
6. Protectyourselfagainstelectricalshocks
Avoidtouchinggroundedpartswithyourbody,e.g.pipes,heatingradiators
andsoon.Thegripofantistaticdesigneddesolderingtoolisconductive.
7. Workenvironment
Do not use the desoldering station in a moist or wet environment. The
desolderingirongunshouldbeplacedontheholderafterfinishedusing.
8. Observethevalidsafetyregulationsatyourworkplace.
Removesolderwaste:
1. Pull the back holder, then the knob will bullet up and become unlocked
automatically.
To Next Page
Loading...
