2
Do not leave the appliance unattended when it is switched on.
Take care of your tools
Do not use the tools for any applications other than soldering/desoldering.
Do not rap the iron against the work bench or otherwise subject the iron to severe shocks.
Do not file the desoldering tip to remove the oxide, please wipe the tip on the cleaning sponge.
Please turn off the power before connecting or disconnecting the soldering iron/desoldering gun.
Maintenance
Before further use, safety devices or slightly damaged parts must be carefully checked for error-free and
intended operation.
Inspect moving parts for error-free operation and that they don’t bind, or whether any parts are
damaged.
Damaged safety devices and parts must be repaired or replaced by a qualified technician, so long as
nothing else is indicated in the operation manual.
Use only accessories or attachments which are listed in the operation manual. Use of other tools and
other accessories can lead to a danger of injury.
Warning: This appliance is not intended for use by young children and infirm persons unless they
have been adequately supervised by a responsible person to ensure that they can use
the appliance safely.
Warning: Young children should be supervised to ensure that they do not play with the appliance.
Unused station should be stored in a dry location which is out of the reach of children. Switch off all
unused desoldering station.
Protect yourself against electrical shocks
Avoid touching grounded parts with your body, e.g. pipes, heating radiators and so on.
Do not use in a moist or wet environment. The soldering iron/desoldering gun should be placed on the
holder after finished using.
Observe the valid safety regulations at your work place.
To Next Page
Loading...