Troubleshooting
The power light does not shine and the electronic part does not do anything.
• Be sure the power switch is in “on” position.
• Check that the power cord is properly installed.
• Check the fuse. Turn off the power switch and unplug the power cord
from the wall outlet before checking the fuse. The fuse housing is next to
the power switch.
• Check the wall outlet with another electronic equipment.
The string clamp does not hold the string:
• Clean the jaws of the string clamp.
• Adjust the clamp on the top.
The string slips through the string gripper:
• Clean the string gripper, like described before.
The clamp does not move smoothly or can not be fixed:
• Clean the tracks of the turntable.
• Adjust the swivel clamp base per instruction.
The tension pulling is not correct:
• Calibrate the machine.
• Is the string not fixed in the clamp?
• Is the clamp base moving?
To Next Page
Loading...