Pro Series Pumps PS-C22 - User Manual

Table of Contents
Important Safety Warnings and
Instructions
Electrical precautions 2
Battery preparation 2
Battery precautions 2
Introduction
Items included in system 3
Additional items needed 3
 
Installing the Pipe and Pump 4
Battery Instructions 5
System Connections
Connecting the backup pump 5
Connecting the battery 5
Connecting two batteries 5
Connecting the charger 5
Connecting the primary pump 5
Product Operation 6
Understanding the Warning
Lights and Alarms
Silencing the alarm
during an emergency 6
Cleaning battery terminals 7
Replacing the battery 7
Fuse alarm 8
Backup pump activated 8
Replacing the backup pump 8
Replacing the primary pump 9,10
Power alarm 11
Charging 11
System operating 11
Testing the System
Test-Reset-Silence button 11
 
 

Remote Terminal 12
Remote Alarm 12
 12
CONNECT Module 12
Maintenance Checklist 12
Parts & Service Information
Technical support 12
 13
Troubleshooting Guide 14
Warranty 15
Other Products 16
Combination Primary and Backup Sump Pump System
Model PS-C22
Instruction Manual & Safety Warnings
IMPORTANT: Even if you have the Pro Series™ PS-C22
Combination Sump Pump System installed by someone
else, you must read and follow the safety information
contained in this manual. Failure to do so could result
in property damage, serious injury, or death.
Scan the QR code
for more information
about the PS-C22
Combination Sump
Pump System

Pro Series Pumps PS-C22 Specifications