Need help?Do you have a question about the Pro Shop LED LitePAR Pro Tri-18 and is the answer not in the manual?
General| Beam Angle | 25 degrees |
|---|---|
| Power Consumption | 60W |
| Power Supply | AC100-240V, 50/60Hz |
| Control Protocol | DMX512 |
| Voltage | 100-240V |
| Frequency | 50/60Hz |
| Light Source | 18 x 3W Tri-color LEDs |
| LED Type | Tri-color RGB |
| Operating Modes | DMX, Sound Active |
Guidelines for safe overhead installation, load limits, and expert approval.
Instructions for connecting the device to main power, ensuring voltage and frequency match.
Procedures for cleaning the exterior, fan, and interior, plus periodic inspections.
Allows user selection of built-in auto show modes and speed adjustment.
Enables selection of non-changing colours, shades, and strobe function settings.
Provides four options for selecting dimming speeds: off, fast, medium, and slow.
Adjusts the LCD backlight settings, including turn-off delay times.
Procedure for setting the unit's starting address for DMX control (001-512).
Configuration options for DMX channel modes: 3, 4, or 9 channels.
Sets the unit's operation mode as Master or Slave for synchronized control.
To Next Page
