4
8. Emissivity: adjustable from 0.1 to 1.0 for testing of different articles
9. Setting Display: display the related information you set
6. Infrared thermometer should be protected in the following:
--EMF (electro-magnetic fields) from arc welders, induction
heaters.
--Thermal shock (caused by large or abrupt ambient temperature
changes, it allows 30 minutes for unit to stabilize before use).
--Do not leave the unit on or near objects of high temperature.
7. Maintenance
1. Lens cleaning: use clean compressed air to blow off loose
particles, use a soft brush to remove debris, at last clean it with
damp cotton cloth.
2. Case cleaning: clean the case with a damp sponge/cloth and
mild soap.
NOTE:
1. Do not use solvent to clean lens.
2. Do not submerge the unit in water
To Next Page
Loading...