Pro'sKit SS-956 User Manual

32 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

SS-956

SMART REWORK STATION WITH VACUUM

PICKUP

User’s Manual

1

st

Edition

,

2017

©2017 Copyright by Prokit’s Industries Co., Ltd.

请换 SS-968 图

Questions and Answers:

K
Kyle MorrowAug 9, 2025
Why Pro'sKit Rework station hot air gun doesn’t heat up?
- B
  Brittney WebsterAug 9, 2025
  If the hot air gun on your Pro'sKit Rework station isn’t heating up, there are several potential causes. First, check the connection of the hot air gun plug, ensuring it's properly connected. If the display shows 'S-E', reconnect the plug of the hot air gun. Another possibility is that the calibration parameter has changed, requiring you to calibrate the device again. Finally, the heating element may be broken, in which case you should replace it with the appropriate heating element (5SS-989NE-H for 110V or 5SS-989NB-H for 220V).
T
Tina TylerAug 25, 2025
What to do if Pro'sKit Rework station hot air gun airflow level is abnormal?
- J
  John StokesAug 26, 2025
  An abnormal airflow level in your Pro'sKit Rework station's hot air gun can be due to a couple of reasons. It might be that the internal pipe is obstructed or loose, causing air leakage; in this case, you should clear the internal pipe and reconnect it tightly. Alternatively, the pump securing screws may not be loosened. You can find these screws on the bottom of the rework station; try loosening them.

Pro'sKit SS-956 Specifications

General

Temperature Range	100°C - 480°C
Display	LED
Power Supply/Input	AC 220V
Heating Element/Heater Material	Ceramic
Nozzle Size	Ø5mm, Ø10mm

Related product manuals

Preview: Pro'sKit SS-989

Pro'sKit SS-989