EasyManua.ls Logo

PRO STORMER BDP40020 - Page 5

PRO STORMER BDP40020
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and / or serious
injury.
Save all warnings and instructions for future reference.
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
General safety
Do not use the device in potentially explosive rooms.
Do not use the device in aggressive atmosphere.
Check accessories and connection parts for possible damage prior to every use of the device.
Do not use any defective devices or device parts.
Before carrying out maintenance, care or repair work on the device, remove the mains plug
from the mains socket. Hold onto the mains plug while doing so.
When positioning the device, observe the minimum distances from walls and other objects
as well as the storage and operating conditions specified in the Technical data chapter.
General safety warnings Electrical safety
The device is to be supplied with a rated residual current of no more than 13 Amp by means
of an RCD (Residual Current protective Device).
Ensure that all electric cables outside of the device are protected from damage (e.g. caused
by animals). Never use the device if electric cables or the power connection are damaged!
The electrical connection must correspond to the specifications in chapter Technical data.
Insert the mains plug into a properly secured mains socket.
Switch the device off and disconnect the power cable from the mains socket when the
device is not in use.
Do not under any circumstances use the device if you detect damages on the mains plug or
power cable.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard. Defective power cables pose a serious
health risk!
Should the connection line of the device be damaged, it must be replaced by the
manufacturer, his customer service or similarly qualified personnel in order to avoid hazards.
Should there be a risk of flooding, install the plug connections in a flood-proof area. There is
a risk of electric shock!
Make sure that the mains voltage corresponds to the specifications on the nameplate.
Have all electrical installations carried out by an expert according to the national regulations
and the device-specific requirements.
Do not use the power cable to drag the device.