Need help?Do you have a question about the Pro-Wax100 WH001 and is the answer not in the manual?
Conditions under which the device should not be operated, including damage or water immersion.
Importance of adult supervision during operation, especially with children.
Instructions to keep the power cord clear of hot surfaces and prevent tripping hazards.
Prohibition against submerging the device in water or any other liquid.
Requirement to operate the device on a stable, flat surface for safety.
Procedure to unplug, cool down, and safely handle the device after use.
Guidance against wrapping the power cord around the unit during operation.
Warning about using only manufacturer-approved attachments to avoid risks.
Instruction to check wax temperature before use to prevent burns.
Step to place the collar ring onto the rim of the wax spa unit.
Instruction to remove the protective plastic lid before operation.
Guidance on adjusting the holder for optimal wax can handling.
Setting the temperature to '100' to liquefy wax, noting the time and lid usage.
Adjusting temperature to a middle setting once liquid and testing for safety.
Procedure for removing the wax can when finished, using the holder.
Daily shutdown process: turn dial counter-clockwise and cover for dust protection.
Cleaning instructions: use wax cleaner when the unit is off and slightly warm.
Instruction to repeat initial setup steps for subsequent uses.
This document outlines the operation and safety instructions for a wax heater, referred to as a "WAX SPA." It is designed for professional use and emphasizes safety precautions to prevent burns, electrocution, fire, or injury.
The WAX SPA is an electrical appliance specifically designed to heat wax to a liquid consistency for various applications, likely hair removal or other cosmetic treatments. It features a temperature control knob that allows users to adjust the heating level, ensuring the wax reaches the desired temperature for effective and safe use. The device is intended to maintain a constant wax temperature once it has reached a liquid state, facilitating continuous use throughout the day.
The operation of the WAX SPA involves a straightforward process to prepare and maintain the wax. To begin, a collar ring is placed on the rim of the SPA, and the plastic lid is removed. A wax-can holder is then adjusted onto the wax can for easy handling. The temperature control knob is initially set to "100" to quickly bring the wax to a liquid consistency, a process that typically takes about 15 minutes. Placing the lid on the warmer during this initial heating phase can expedite the process.
Once the wax is liquid, the dial is moved to a middle position to maintain a constant temperature. A crucial safety step before applying the wax is to test its temperature by placing a small quantity on the inside of the wrist and adjusting the dial as needed. This ensures the wax is not too hot and prevents burns. When the wax is finished, the can can be lifted out using the wax-can holder while the warmer is still warm. For daily use, the warmer should be turned off every evening by fully turning the dial counter-clockwise. A clear lid is provided to cover the warmer, keeping the wax dust-free when not in use. For subsequent uses, the initial steps of placing the collar ring, removing the lid, adjusting the holder, and setting the temperature are repeated. The manual strongly advises against immersing the WAX SPA in water or other liquids and emphasizes the importance of keeping the surrounding area dry. It also warns against operating the device if it has a damaged cord or plug, is not working properly, has been dropped, or has fallen into water. Close supervision is required when the WAX SPA is used by or near children, and the cord should be kept away from heated surfaces. The device should always be used on a level surface, and the cord should not be wrapped around the WAX SPA during use. Attachments not recommended by the manufacturer should be avoided as they may cause hazards.
Maintaining the WAX SPA involves simple cleaning procedures to ensure its longevity and hygienic operation. To clean the warmer, a wax cleaner should be used when the machine is off and still slightly warm. This allows for effective removal of wax residue without damaging the device. The clear lid plays a vital role in maintenance by protecting the wax from dust and debris when the warmer is not in use, contributing to a cleaner and more sanitary environment for the wax. The manual also advises allowing the device to cool before handling, cleaning, or storing it, and to unplug it when not in use. These practices help prevent wax dust from accumulating and ensure the device remains in good working condition.
General| Power | 100W |
|---|---|
| Frequency | 50/60 Hz |
| Capacity | 500 ml |
| Weight | 1.2 kg |
| Material | Plastic |
| Voltage | 220-240V |
To Next Page