Need help?Do you have a question about the Pro1 IAQ TrueComfort T755S and is the answer not in the manual?
General| Type | Programmable Thermostat |
|---|---|
| Connectivity | Wi-Fi |
| Operating Voltage | 24V AC |
| Geofencing | Yes |
| Energy Usage Reports | Yes |
| Display | Touchscreen |
| Power Source | Hardwired or Battery |
| Stages | Up to 2 Heat/2 Cool |
| Programmability | 7-Day Programmable |
| Terminals | R, C, W, Y, G, O/B |
| Voice Control | Amazon Alexa, Google Assistant |
| Alerts and Notifications | Yes |
| Installation | DIY or Professional |
Guidance on selecting optimal wall placement for thermostat installation.
Identifies and describes the key components and displays of the thermostat.
Instructions on how to safely remove the thermostat's private label badge.
Critical safety warning regarding electrical hazards during installation.
Information regarding mercury-free products and proper disposal of old units.
Explains the function of each terminal on the thermostat for wiring.
Details the required wire gauge and type for thermostat installation.
Configures system to reach wake setpoint before the scheduled wake time.
Allows selection between 12-hour and 24-hour clock display formats.
Controls thermostat fan operation during calls for heat or cool.
Sets the thermostat to 5+1+1 programming or non-programmable.
Configuration for operating the thermostat with a heat pump system.
Allows configuration of the system switch for specific applications.
Manages heat pump behavior with gas auxiliary heating systems.
Configures the thermostat for 2 or 3 stage heat pump operation.
Sets a delay for the fan operation in cooling mode for energy saving.
Configures the thermostat for different remote sensor applications.
Option to disable the local thermostat sensor.
Sets the number of indoor remote sensors connected.
Configures balance point settings for fossil fuel kit elimination.
Adjusts run time for auxiliary to energize when outdoor temp is above balance point.
Displays the temperature from the floor sensor.
Sets the maximum floor temperature limit for heating.
Sets the minimum floor temperature limit for heating.
Keeps stages energized until the setpoint is satisfied.
Adds a delay before second/third stages activate.
Instructions for physically mounting the thermostat onto its sub-base.
Details on how to install batteries, noting it's optional if hardwired.
Step-by-step guide to setting the current day of the week and time.
Explains the thermostat's programmable features and default schedule.
Detailed instructions for customizing the 5+1+1 program schedule.
Lists technical specifications, including temperature ranges and load ratings.
Provides contact details for Pro1 IAQ Inc., including phone and web.
To Next Page
