Proaster THCR-03 - Cleaning and Maintenance - Disassembly; Disassembly for Thorough Cleaning

16
5
(2) Cleaning and Maintenance – Disassembly before cleaning
Manually turn the
clamp connecting
the damper and
the u-shaped pipe
and remove.
Remove the pipe
from the body by
manually moving
the pipe back and
forth.
!!Warning!! Do not remove the lower
bolts.
(Doing so creates difficulties when
reassembling)
Removal is possible without removing
the bolts.
Use a Phillips
screwdriver to
remove the 4 screws
connecting the
damper and drum.
Grasp the damper
and pull it out in
the direction of the
arrows (as shown)
to remove.