EasyManuals Logo

ProBreeze PB-F-22 User Manual

ProBreeze PB-F-22
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14 of 122 | English
OPERATING INSTRUCTIONS
On/Off Press On/Off button on the control panel.
Fan Speed To turn the fan speed up or down, either press the fan speed button
on the remote or on the control panel. The speed indicator on the
led display will change to reect the speed from 1-10.
Modes Modes: To choose your desired mode, either press the mode button
on the remote or on the control panel. Pressing this button will cycle
through the below modes:
• Fan mode: In this mode, you can control the fan speed from
settings 1-10. To choose your desired fan speed press the fan
speed button or the '±' buttons on the remote to adjust.
• Natural mode: In this mode, the fan auto-cycles through
fan speeds to mimic natural airow. To choose between two
available speed settings press the fan speed button or the '±'
buttons on the remote to adjust
• Night mode: Night mode slowly reduces the fan speed until
it switches to the lowest speed setting to save energy as you
sleep. Once activated, the fan speed will function on high
speed for 30 minutes and will then reduce to mid speed for
30 minutes and low speed for 30 minutes before switching
off. After 60 seconds, the display lights will turn off for an
undisturbed rest. To choose between the two available night
settings press the fan speed button or the '±' buttons on the
remote to adjust.
• Air Quality mode: Air Quality mode automatically changes the
speed of the fan depending on the air quality of the room. The
lower the air quality the higher the fan speed will be.
Temperature
control
In any operating modes, you can activate temperature control
which will amend the fan speed to achieve an ambient
temperature according to the table below:
When the room
temperature is increasing
≥30°C
The fan speed level will increase by
2 levels when the room temperature
has increased by 1°C.
When the room
temperature is decreasing
<30°C
The fan speed level will increase by 1
level when the room temperature has
increased by 1°C.
≥31°C
The fan speed level will decrease by
2 levels when the room temperature
has decreased by 1°C.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ProBreeze PB-F-22 and is the answer not in the manual?

ProBreeze PB-F-22 Specifications

General IconGeneral
BrandProBreeze
ModelPB-F-22
CategoryFan
LanguageEnglish

Related product manuals