English | 11 of 92
Problem Cause Solution
The machine does not turn
on after installation
The power cable is not
plugged in or has poor
contact.
Make sure the plug is properly
inserted into the socket.
The switch on the body is not
turned on.
Turn on the switch on the
body.
The remote does not work
The battery needs replacing. Replace the battery.
The remote is being used
more than 5m away from
the fan.
Use the remote closer to
the fan and make sure it
is pointing directly at the
display panel.
TROUBLESHOOTING
――
CLEANING
――
WARNING: ALWAYS TURN THE APPLIANCE OFF AND UNPLUG
THE POWER CORD FROM THE ELECTRICAL OUTLET BEFORE
HANDLING OR CLEANING IT.
CAUTION: DO NOT ALLOW WATER OR OTHER LIQUIDS TO
RUN INTO THE INTERIOR OF THE APPLIANCE, AS THIS COULD
CREATE A FIRE AND/OR ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY ABRASIVE CLEANERS OR
SOLVENTS, AS THIS CAN DAMAGE THE APPLIANCE.
• Do not attempt to clean the appliance in any other way
than that detailed by the manufacturer.
• Clean the exterior surface of the appliance by wiping
it with a soft, damp cloth. Dry the appliance with a soft,
clean cloth.
• Clean the vents and openings of the appliance regularly
with a vacuum cleaner, using the brush attachment to
avoid any dust build-up.
To Next Page
Loading...
Need help?
General
