Probuilder 56157 - Cleaning and Maintenance

21
GB
Wood type
Wood mode Wood mode
Rhodes west teak 1 African whitewood 3
Ormosia hosiei 1 Rose wood 3
Brazil walnut tree 1 Elm tree 3
Walnut tree 2 Gmelina chinensis benth 3
Apitong 2 Hemlock 3
White poplar 2 Dipterocarpus 3
Teak 2 Oak 3
Banya pine 3 Chinese red pine 4
Douglas fir / D-fir 3 Coquito 4
Lauan 3 Abies holophylla maxim 4
Manchurian ash 3 Larch 4
European silver 3 Apitong 4
Maple 3 Birch 4
White ash 3 Basswood 4
Construction materials
Cement mortar 5
Lime mortar 6
Brick 7
In production, the Drying-up method and
Electrical method are generally used.
With the Drying-up method, a
woodsample is weighed before being
placed in an oven to dry. The weight
dierence is then measured and
compared to a Moisture Content Index.
This method is very precise but time
consuming and mostly applicable to
laboratory use.
The Electrical method, measures the
electrical resistance in wood according to
moisture content and can be easily used
in workshops, construction-sites and so
on.
CLEANING AND MAINTENANCE
Keep away from water.
Clean with a dry cloth.