Need help?Do you have a question about the Procentec ProfiTrace 2.9 and is the answer not in the manual?
General| Brand | Procentec |
|---|---|
| Model | ProfiTrace 2.9 |
| Category | Measuring Instruments |
| Language | English |
Overview of ProfiTrace 2 as a powerful mobile analyzer for PROFIBUS networks.
Lists key functionalities including Busmonitor, Oscilloscope, Bar Graph, Topology Scan, and DP Master.
Details faults detectable by ProfiTrace on PROFIBUS DP networks with corresponding sub-programs.
Specifies minimum and recommended hardware and software requirements for ProfiTrace 2.
Describes the hardware components and their functions within the ProfiCore Ultra unit.
Explains power supply options and the different connectors available on the ProfiCore Ultra.
Outlines the step-by-step process for installing ProfiTrace software and its associated drivers.
Lists important preparatory steps and checks before commencing the software installation.
Guides on physically connecting the ProfiCore hardware to the PC for driver installation.
Explains how to change the ProfiTrace software's display language from the settings menu.
Explains the necessity of licenses for ProfiTrace features and the licensing combinations available.
Details the methods for acquiring and installing software license files via website or software.
Provides instructions on physically connecting the ProfiCore to a PROFIBUS DP or PA network.
Explains how to launch the ProfiTrace software and initialize the ProfiCore hardware.
Introduces core analysis functions: Live List, Statistics, and Message Recording.
Details the ScopeWare functionality for real-time oscilloscope analysis of signal quality.
Explains the Bar Graph feature for assessing signal strength and overall network health.
Describes how to automatically generate a network topology map of the PROFIBUS network.
Explains the procedure to measure PROFIBUS cable segment lengths using the software.
Defines what constitutes acceptable signal patterns for PROFIBUS DP measurements.
Describes identifying termination issues or cable breaks via oscilloscope signal reflections.
Explains how to diagnose short circuits between A and B signal lines using oscilloscope analysis.
Details how to recognize and diagnose EMC/EMI disturbances by analyzing signal deviations.
Explains how to assign names and properties to network devices for reporting and identification.
Guides on setting up multiple measurement points for comprehensive network analysis.
Describes how to define new network segments in the Network Manager for analysis.
Guides on configuring ProfiCaptain as a DP master for device control.
Introduces Class 2 commands for scanning and diagnosing devices.
Guides on adding and configuring slave devices, including GSD file management.
Explains how to read and write I/O data for connected devices.
Guides on installing necessary drivers for the ProfiTrace OPC server to enable data access.
Explains how to enable, configure, and activate the OPC server for external application access.
Guides on installing CommDTM drivers and the DTM server for device communication.
Explains how to use the CommDTM with FDT managers for device interaction and configuration.
Provides physical specifications including dimensions and weight of the ProfiCore Ultra.
Lists operating and storage temperature ranges and the isolation class for the ProfiCore Ultra.
Details power requirements, USB consumption, and adapter specifications for the ProfiCore Ultra.
To Next Page
