Proceq Pundit Lab - Waveform Display Measurement

© 2013 by Proceq SA
12
5.4. Basic Measurement – Waveform Display
Select “Basic
Measurements”
Start the measurement
Select “Waveform”
Adjust as required
(See below)
Cancel to return to
standard display
Waveform Controls
Y
<
>
V
ertical
zoom
X < >
Horizontal zoom
t
-
+
Manual
trigger
adjustment
 Stop/Start
Note 1: Rx gain may need reducing for vertical zoom to have a noticeable effect.
Note 2: Once adjusted, trigger point does not reset automatical
ly unless a new measurement is started
in the menu “Start the measurement”
Note 3: The waveform is not saved, only the transmission time.