Procom PR-300 - User Manual

How To Begin
Begin on the channel that is being
added or deleted.
For this example, Channel 1 will be removed
from the scan list.
Toggle Menu Options
Press the up/down keys until
the “Scan List” menu option is
displayed.
Access the Short Menu
Press the menu function key,
the default is the S/M Key, long
press.
CONTINUE ON NEXT PAGE
Adding and deleting channels from the scan list allows you to personalize the channels that will be
monitored when the scan function is activated.
Press the S/M Key
Press the S/M key to select the
menu option. The current setting
will be displayed.
Press the S/M Key
Press the S/M key to select the
desired setting.
Use the Up or Down Keys
Cycle through the setting
options. The scan list options are
“ON” or “OFF”.
QUICK START GUIDE
PR-300 Scanning - Adding/Deleting Channels

Summary

Adding and Deleting Channels

How To Begin

Start on the channel that is being added or deleted from the scan list.

Access the Short Menu

Press the menu function key (S/M Key) to access the menu options.

Navigate Menu Options

Press up/down keys until the "Scan List" menu option is displayed.

Confirm Selection

Press the S/M Key to select the menu option or desired setting.

Cycle Scan List Settings

Use the Up or Down Keys to cycle through options like "ON" or "OFF".

Exit the Menu

Press the F Key or wait for inactivity to exit the menu.

Repeat Process

Repeat the steps for any other channels needing addition or deletion.

Scan List Prerequisites

Ensure at least two channels are programmed for the scan function to operate.

Important Notes on Scan Lists

Scan List Scope

Scan list configuration is applied per channel selected in the short menu.

Scan List Performance

A large scan list may cause missed messages due to longer channel check times.

Procom PR-300 Specifications

General

Channels	16
Power Output	5W
Battery	Li-ion 1500mAh
Waterproof	IP54
Frequency Range	400-470MHz