19/32
2009/10 - Indice de révision : I - Code : 0035001
- Allen key n° 4
- 2 Box wrenches n°13
- 1 Box wrench n° 17
- 1 Tubular socket wrench n° 10
- Concrete drill bit Ø10mm
- Tape measure
TOOLS REQUIRED
Number of people required for installation: :
- Two people to carry the axle to the pool.
- One person for assembly.
Time required for installation (axle and slat cover) :
- excluding installation of the slat cover: 1 hour
- including installation of the slat cover: approximately 3 hours.
PEOPLE REQUIRED
- Spirit level
- Impact drill
- Grinding wheel with diamond disk
- Flat chisel and hammer
- Hard rubber mallet
- Phillip’s screw driver
To Next Page
Loading...