8
1. Always make sure mixer is
unplugged and speed control
is set to (OFF).
2. With platform level, place the
L-shaped tab on platform into
slot on bottom of mixer.
3. Gently press the back of the
mixer onto the platform until it
locks into position.
4. Following diagrams on bottom of
mixer, insert desired attachment(s)
into proper openings on bottom of
mixer. Push and click into place.
5. Plug into outlet.
6. Move speed control to desired
speed. Start at 1 and increase
speed as needed.
7. When finished, turn speed
control to (OFF).
8. Unplug.
9. To eject attachments, push straight
down on the speed control.
How to Use Your Stand Mixer
To Next Page
Loading...
