10
1. Setting the Clock
1) Touch Clock pad.
2) Use the number pads to enter the correct time.
3) Touch Clock pad again.
NOTE:
This is a 12-hour cycle clock. When the oven is first plugged in or when power
resumes after a power interruption, the display will show “ENTER CLOCK TIME.”
If you prefer to not have the clock displayed, touch Reset.
2. Setting the Oven Timer
1) Touch Timer.
2) Enter the amount of time by touching the number pads.
3) Touch Start/Stop.
NOTES:
• The maximum time you can enter is 99 minutes and 99 seconds.
• Time countdown can be seen in display for 3 seconds before clock or cooking time
is returned to display.
• Touch Timer and then touch Reset to cancel Timer during timing process.
3. Setting a Cooking Program
A. One-Stage Cooking
1) Use the number pads to set cooking time. You can set a cooking time from 1 second
to 99 minutes and 99 seconds.
2) If you want to set a power level other than 100% power, touch Power, then use the
number pads to enter the power level. You can set the power level from 1 to 9.
3) Touch Start/Stop to start cooking. Use single digits to set a cooking power level.
To Next Page
Loading...