Proctor-Silex 87416 - Advanced Cooking Functions; Two-Stage Cooking Setup; Speed Defrost Operation

11
B. Two-Stage Cooking
Some recipes require different stages of cooking at different temperatures.
1) SET STAGE 1: Follow steps 1 and 2 in “One-Stage Cooking.” DO NOT touch Start/Stop.
2) SET STAGE 2: Touch Cook; then enter proper cooking time and (lower) power level.
(Most 2-stage recipes use lower power for second stage.)
3) Touch Start/Stop.
NOTES:
• After Stage 1 time has elapsed, one signal sounds, signaling the beginning of Stage 2.
• After total time has elapsed, 4 signals sound and “END” appears in display. Touch Reset
or open oven door to clear “END” before starting another cooking function.
4. Speed Defrost
1) Touch Speed Defrost.
2) Enter desired defrosting time by touching correct number pads.
3) Touch Start/Stop.
NOTES:
• After time has elapsed, four signals sound and icon END appears in display. Touch Reset
pad or open the door to clear icon END before starting another cooking function.
• After setting Speed Defrost, oven can be programmed to automatically switch to
one- or two-stage cooking.
• For Speed Defrost and One-Stage Cooking, follow steps above. Before touching
Start/Stop, touch Cook, enter time and power level and then touch Start/Stop.
• For Speed Defrost and Two-Stage Cooking, follow steps above. Before touching
Start/Stop, touch Cook, enter two-stage cooking programs.
Number pad
9
8
7
6
5
4
3
2
1
Cooking Power
90%
8
0%
70%
60%
50%
40%
30%
20%
10%