Need help?Do you have a question about the Proctor-Silex Power Opener and is the answer not in the manual?
General| Brand | Proctor-Silex |
|---|---|
| Model | Power Opener |
| Category | Can Opener |
| Language | English |
Guidance on selecting a suitable location for mounting the can opener under a cabinet.
Detailed steps for positioning and securing the mounting bracket to the cabinet.
Instructions for sliding the can opener onto the installed mounting bracket.
Plug the can opener into a 120-volt AC outlet.
Position the can, lower the lever to start cutting, and the opener stops automatically.
Raise the piercing lever to release the opened can.
Advice on moving the magnet for smaller cans.
Recommendation to support large or heavy cans during operation.
Instructions on how to use the can opener to remove bottle caps.
Instructions for using the bag opener slot.
Steps to detach the can opener from its mounting bracket.
Instructions for removing, washing, and replacing the piercing lever assembly.
Wipe the unit with a clean, damp cloth; do not immerse in water.
To Next Page
