33
Start-up Procedures
12
10
See page 20
for settings.
Let the system run for several cycles
until all the nozzles produce fog.
1.5
1
0.5
2.5
2.0
MIST POWER
ON
ON TIME
OFF TIME
7
4
0.5
1.5
11
Set the timer to the recommended settings.
9
11
If the air pressure is not 15-20PSI,
adjust the air pressure on the air
compressor with a 5/32in allen wrench.
Check for leaks and
ensure that proper fog
is coming from the
FogMist™ Blocks.
To Next Page
Loading...