EasyManua.ls Logo

Prodew FogMist Block - Page 34

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
Timer Settings
ON Time - 1.5 - 2 minutes
Duration of fog cycle.
OFF Time - 10 minutes
Duration in between fog cycles.
Factory Presets
The ON time is set by
rotating the black knob
marked ‘ON TIME’
The recommended cycle times are preset at our manufacturing facility.
If repairs or changes have been made to the system, we recommend that you
ushthelinestoensurethatnoparticles,liquidTeon,Teontape,pipedope,
or other foreign matter is present in the system.
IMPORTANT
The factory presets are the
recommended settings for the system.
Only change the settings if there is
too much or too little fog.
The OFF time is set by
rotating the black knob
marked ‘OFF TIME’
1.5
1
0.5
2.5
2.0
MIST POWER
ON
OFF
ON TIME
(minutes)
OFF TIME
(minutes)
8
4.5
1
15
11.5
1.5
1
0.5
2.5
2.0
MIST POWER
ON
OFF
ON TIME
(minutes)
OFF TIME
(minutes)
8
4.5
1
15
11.5
FILTER SCHEDULE
If the store has an RO System,
this schedule will change.
Water quality
PPM coming into
Solenoid Box
Filter
Change
Schedule
50 XX Months
100 XX Months
150 XX Months
200 XX Months
250 XX Months
300 XX Months
350 XX Months
400 XX Months
450 XX Months
500 XX Months
Having trouble
understanding our instructions?
Contact our customer service
department with your questions.
sales@prodew.com