PRODIS XD701S - Page 6

OPERATING INSTRUCTIONS
WARNING
AFTER TURNING OFF YOUR REFRIGERATOR
YOU MUST WAIT AT LEAST 5 MINUTES BEFORE
RESTARTING TO AVOID DAMAGE TO THE
COMPRESSOR
XD080818UM Rev 1.4 4
ALTERING THE TEMPERATURE (FREEZERS WITH
SF-820T DIGITAL TEMPERATURE CONTROL)
PART III
YOUR FREEZER FEATURES A DIGITAL CONTROLLER.
ALL PARAMETERS ARE PRESET AT THE FACTORY
FOR OPTIMUM COOLING PERFORMANCE AND
EFFICIENCY. ALTERING THE PARAMETERS OF THE
DIGITAL CONTROLLER WILL ADVERSELY AFFECT
THE COOLING EFFICIENCY AND PERFORMANCE
OF THE FREEZER.
TO CHANGE THE SET POINT OF YOUR COOLER
PRESS AND HOLD THE SET BUTTON, THE DISPLAY
WILL FLASH AND THE CURRENT SET TEMPERATURE
WILL BE DISPLAYED. USE THE UP AND DOWN
ARROWS TO ADJUST THE TEMPERATURE
ACCORDING TO YOUR NEEDS AND PRESS THE SET
BUTTON AGAIN TO STORE THE NEW SET POINT.
CHANGING THE SET POINT WILL AFFECT
THE PERFORMANCE AND EFFICIENCY OF
THE REFRIGERATOR AND SHOULD ONLY BE
UNDERTAKEN BY A QUALIFIED REFRIGERATION
ENGINEER.
ALTERING THE TEMPERATURE (REFRIGERATORS
FITTED WITH AN SF-101 CONTROLLER)
TO CHANGE THE SET POINT OF YOUR COOLER
PRESS AND HOLD THE SET BUTTON, THE DISPLAY
WILL FLASH AND THE CURRENT SET TEMPERATURE
WILL BE DISPLAYED. USE THE UP AND DOWN
ARROWS TO ADJUST THE TEMPERATURE
ACCORDING TO YOUR NEEDS AND PRESS THE SET
BUTTON AGAIN TO STORE THE NEW SET POINT.
CHANGING THE SET POINT WILL AFFECT THE
PERFORMANCE AND EFFICIENCY OF THE COOLER
AND SHOULD ONLY BE UNDERTAKEN BY A
QUALIFIED REFRIGERATION ENGINEER.
ALTERING THE TEMPERATURE (REFRIGERATORS
WITH ANALOGUE/DIAL THERMOSTATS)
YOUR REFRIGERATOR IS FITTED WITH AN
ANALOGUE/DIAL THERMOSTAT WHICH RANGES
FROM 0 TO 6. 0 IS OFF, 1 IS WARMEST THROUGH
TO 6 THE COLDEST SETTING. FOR OPTIMUM
EFFICIENCY AND PERFORMANCE YOUR
REFRIGERATOR IS FACTORY PRESET BETWEEN
POSITION 4-5, TO DECREASE THE TEMPERATURE
INSIDE THE REFRIGERATOR TURN THE THERMOSTAT
TO RIGHT (INCREASE THE NUMBER).
SF-101
SET
SF-101
SET
YOUR COOLER FEATURES A DIGITAL CONTROLLER.
ALL PARAMETERS ARE PRESET AT THE FACTORY
FOR OPTIMUM COOLING PERFORMANCE AND
EFFICIENCY. ALTERING THE PARAMETERS OF THE
DIGITAL CONTROLLER WILL ADVERSELY AFFECT
THE COOLING EFFICIENCY AND PERFORMANCE
OF THE COOLER.
0/OFF
1
2
3 4
5
6
C
O
L
D
E
R
XDMANUAL.indd 6 16/07/2021 11:19:52