Need help?Do you have a question about the PROEL Sagitter BATI 4DL-H and is the answer not in the manual?
General| Light source | LED |
|---|---|
| Protocols | DMX512 |
| Display | LCD |
| Power consumption | 150W |
| IP rating | IP20 |
| Dimensions | 350 x 240 x 150 mm |
| Control | DMX |
| Power supply | 100-240V AC, 50/60Hz |
| Input Ports | DMX |
Explains symbols for waste disposal, electrical safety, general warnings, and compliance with European directives.
Covers manual reading, qualified personnel, pre-installation checks, and minimum distances for safe operation.
Details mounting suitability, temperature range, and ventilation requirements for safe operation.
Emphasizes proper earthing and anti-shock switches for electrical safety.
Advises on safe maintenance procedures and strictly warns against direct light exposure.
Instructs to carefully open the package, check all parts, and contact the supplier for missing or damaged items.
Warns to let the unit reach room temperature before turning it on if exposed to drastic temperature changes.
Identifies the LED/pairing button, microphone, and display/buttons on the device's side view.
Details connecting to mains, projector must be off, and the meaning of the bottom LED indicators (RED/GREEN).
Outlines flight case charging steps: open cover, raise case, projectors off, connect internal cables, and connect to mains.
Recommends charging monthly and maintaining a minimum charge level of 5% for optimal battery life.
Advises against shaking the device and suggests installation on floor, wall, ceiling, or truss with safety rope.
Explains mains connection requirements by a qualified electrician and DMX chain connection using specific cables.
Details DMX addressing, auto color, auto fade, auto sudden, auto strobe, and WiFi mode settings.
Covers sound modes with adjustable sensitivity and manual color adjustment (RGBWA-UV, Static Color).
Includes settings for wireless, infrared, display backlight, LCD close time, factory reset, and system information.
Explains connecting projectors in chain via DMX cable or wireless mode, setting master and slave modes.
Details activating wireless mode, pairing, and assigning projectors to 7 groups using status LED colors.
Describes activating WiFi mode and controlling the projector via the 'LedWiFi' app on a smartphone.
Defines channel functions for Red, Green, Blue, White, Amber, and UV control.
Details channels for master dimmer, color control, and strobe function.
Covers master dimmer, color controls, UV, macros, sound mode, and speed/sensitivity settings.
Explains how to activate auto mode, sound mode, manual color adjustment, color macro, and strobe via remote.
Warns that remote control settings are temporary and will be lost upon power off; require display setup for persistence.
Recommends frequent cleaning using a vacuum cleaner or air compressor and soft brush/cloth.
Suggests charging monthly, notes best performance after 3 charge/discharge cycles, and warns against short-circuiting.
Specifies power supply range (100-240V), battery runtime (~5H), and power consumption (50W).
Details LED type (4x12W RGBWA-UV) and beam angle (15°).
Lists operation modes (Auto, Sound, Master/slave, DMX, Wireless, WiFi) and DMX channels (6-10).
Provides product dimensions (140x205x140 mm) and weight (3.5 kg).
To Next Page