PROEMION CanLink GSM 5 Series User Manual (English)

xmckinneyJul 30, 2025

What to do if PROEMION CanLink GSM 5 Recording Equipment CANlink GSM / UMTS 5xxx does not work properly?

J
Jose JonesJul 31, 2025
If the PROEMION CANlink GSM / UMTS 5xxx isn't functioning correctly, consider the following: * Verify the CAN baud rate is correctly configured. * Ensure the wiring is accurate, paying attention to connector pinning. * Confirm the CAN network is properly terminated by measuring 60 Ohms between CAN-H and CAN-L, and ensure at least one termination resistor is present in a desk network. * Check that the CAN receive objects are correctly configured and activated.

Brand	PROEMION
Model	CanLink GSM 5 Series
Category	Recording Equipment
Language	English

Brand

PROEMION

Model

CanLink GSM 5 Series

About the Device

Important Device Information

Provides essential details about the device, including its elements and specifications.

Device Functions

Details the various functions and capabilities of the CANlink GSM / UMTS 5xxx devices.

Service and Support

Information on obtaining help and support for the device, including contact details and websites.

Safety Information

General Information

Outlines general safety instructions and precautions for safe device operation.

Safety Advice

Provides specific safety advice related to RF energy, health care, air traffic, and explosives.

Avoidance of Property Damage

Details precautions to prevent damage to the device and surrounding property.

FCC Notice

Contains important notices regarding FCC compliance and operational requirements.

Warranty and Liability

Specifies the warranty terms and liability limitations for the device.

Functionality and Features

Functional Range

Describes the device's functional range, including communication via CAN, GSM, and Internet.

Connectors

Details the device's connectors, including types and pin assignments for various models.

Indicator Elements

Explains the status LEDs on the device and their meaning for different operational states.

Cables

Information about the cables used with the device, such as the CAN/power cable.

Getting Started

Installing Software

Guides the user through installing the RMsys Configurator software for device configuration.

Wiring

Provides instructions on connecting the device, including antennas, gateway, PC, and power supply.

Initial Configuration

Details initial device configuration steps using RMsys Configurator, including communication settings.

Inserting SIM Card

Step-by-step instructions for inserting the SIM card into the device.

Connecting to Proemion

Guides on establishing a connection from the device to the Proemion server.

Enabling Remote Configuration

Explains how to enable remote configuration via a Proemion real-time connection.

Mounting

Provides instructions and details for mounting the device, including panel and DIN rail installations.

Operation

Introduction

Introduction to operating the device, including safety warnings and general information.

Change Configuration

Explains how to change the device configuration using the RMsys Configurator software.

Real-time Mode

Describes the real-time mode of operation for the device, enabling direct CAN network access.

File-Transfer Mode

Details the file-transfer mode for segmented file transfer between Proemion and CANopen controls.

Troubleshooting

Provides solutions for common problems encountered with the device's operation.

Disposal

European Union

Provides information on proper disposal of the device according to EU regulations.

Technical Data

Mechanical Data

Details the mechanical specifications of the device, including dimensions and weight.

Electrical Data

Provides electrical specifications such as power supply requirements and current consumption.

Interfaces

Details the device's interfaces, including GSM frequency bands and baud rates.

Protocols

Lists the communication protocols supported by the device, such as CANopen and J1939.

Indicator and Operating Elements

Describes the status LEDs and other operating elements on the device.

Other Features

Highlights additional features of the device, such as the real-time clock.

Certifications

CANlink GSM 5xxx

Details certifications and compliance standards for CANlink GSM 5xxx models.

CANlink UMTS 5xxx A1

Details certifications and compliance standards for CANlink UMTS 5xxx A1 models.

CANlink UMTS 5xxx A2

Details certifications and compliance standards for CANlink UMTS 5xxx A2 models.

Certificates

Information on how to inspect product certificates.

PROEMION CanLink GSM 5 Series User Manual

Table of Contents

Questions and Answers:

PROEMION CanLink GSM 5 Series Specifications

Summary