Professional Woodworker 7552 User Manual

8807552 01/13
18 GAUGE 1-1/4 INCH BRAD NAILER
CALIFORNIA PROPOSITION 65
WARNING: You can create dust
when you cut, sand, drill or grind
materials such as wood, paint,
metal, concrete, cement, or other
masonry. This dust often
contains chemicals known to
cause cancer, birth defects, or
other reproductive harm. Wear
protective gear.
WARNING: This product or its
power cord may contain
chemicals, including lead,
known to the State of California
to cause cancer and birth
defects or other reproductive
harm. Wash hands after
handling.
Important!
When using equipment, a few
safety precautions must be
observed to avoid injuries and
damage. Please read the complete
operating manual with due care.
Keep this manual in a safe place,
so that the information is available
at all times. If you give the
equipment to any other person,
give them these operating
instructions as well. We accept no
liability for damage or
accidents which arise due to
non-observance of these
instructions and the safety
information herein.
SPECIFICATIONS
Operation Pressure:
60-100 PSI
Magazine Capacity: 100 Piece
Fastener Length: 3/8 - 1-1/4 in.
Nail Size: 18 Gauge
Air Inlet: 1/4” NPT
Air Consumption: 1.6 CFM
CAUTION:
FOR YOUR OWN SAFETY,
READ INSTRUCTION MANUAL
COMPLETELY AND
CAREFULLY BEFORE
OPERATING THIS BRAD
NAILER.
Any failures made in following
the safety regulations and
instructions may result in an
electric shock, fire, and/or
serious injury.
Model: 7552
SAFETY INSTRUCTIONS
1) Read and understand tool
labels and the manual. Failure
to follow warnings, dangers, and
precautions could result in
death or serious injury.
2) Keep work area clean.
Cluttered areas invite injuries.
3) Don’t allow children at the
work area. Do not let them
handle the tool.
4) Do not operate the tool if
under the influence of alcohol or
drugs. Read warning labels on
prescriptions to determine if
your judgment or reflexes are
impaired while taking drugs. If
there is any doubt, do not
attempt to operate.
5) Use safety glasses. Safety
glasses should conform to ANSI
Z87.1 specifications. Before
operating, wear safety glasses
against flying debris from the
front and side. Safety glasses
should be worn when loading,
operating, unloading, or
servicing this tool.
6) Use ear protection. The
working area may be exposed
to high noise levels that can
lead to hearing damaged.
For customer service, call 1-800-348-5004 or email feedback@natitools.com

Professional Woodworker 7552 Specifications

General

Brand	Professional Woodworker
Model	7552
Category	Nail Gun
Language	English

Summary

Important Operating Instructions

California Proposition 65 Warnings

Warnings about chemicals known to cause cancer, birth defects, or reproductive harm.

General Safety Precautions

Essential safety precautions to avoid injuries and damage during operation.

Operating Caution

Read the instruction manual completely and carefully before operating the nailer.

Nailer Specifications

Details on operation pressure, magazine capacity, fastener length, nail size, air inlet, and air consumption.

Safety Instructions

Comprehensive safety guidelines for tool operation, including personal protective equipment and work area safety.

Setting Up the Nailer

Initial Assembly and Setup

Instructions for attaching the air line and accessories after receiving the assembled air tool.

Connecting to Air Supply

Steps for connecting the nailer to an air supply, including oiling procedures.

Loading and Operating the Nailer

Loading Fasteners

Procedure for loading fasteners into the magazine, including depressurizing and locking steps.

Operating the Nailer

Guidance on testing driving depth, connecting air, loading fasteners, and operating the tool with different driving modes.

Maintenance and Troubleshooting

Regular Maintenance

Details on lubrication, air supply maintenance, and cleaning procedures for pneumatic tools.

Troubleshooting Guide

Troubleshooting Guide

Guide to diagnose and correct common symptoms like air leaks, power loss, skipped fasteners, and improper driving.

Warranty Information

Limited Manufacturer Warranty

Details the 1-year limited warranty, coverage, exclusions, and service procedures for the product.

Parts Information

Parts Diagram

Exploded view diagram illustrating all components of the 18 Gauge 1-1/4 Inch Brad Nailer.

Parts Identification

List of part numbers and descriptions for ordering replacement components.