To Next PageTo Next PageWhat to do if my Profi Cook PC-HWS 1145 Water Dispenser shows error E7?
If your Profi Cook Water Dispenser displays 'E7' and you hear 10 signal tones, it means the water tank is empty. Immediately fill the water tank with cold water. If the error message remains, disconnect the appliance from the power supply for about one minute, then reconnect. Unlock the appliance with the 'Lock' button and proceed as described in the 'Operation' section.
Why is my Profi Cook PC-HWS 1145 Water Dispenser not heating water?
If your Profi Cook Water Dispenser is dispensing water without heating it, the over-temperature protection may be enabled. Reset the error message by pressing the “RESET” button on the housing. Then, proceed as described under the 'First use' section.
How to fix a Profi Cook PC-HWS 1145 Water Dispenser that won't turn on?
If your Profi Cook Water Dispenser isn't working, here are a few things to check: * Make sure the appliance is properly plugged into the wall outlet. * Check the wall outlet with another appliance to ensure it's working. * Check the fuse. If the problem persists, the appliance may be defective.
General| Brand | Profi Cook |
|---|---|
| Model | PC-HWS 1145 |
| Category | Water Dispenser |
| Language | English |
Key safety warnings for user and appliance protection.
Lists appliance parts and confirms delivery contents.
Instructions for placement and initial setup.
Steps for safely removing the appliance from packaging.
Steps to prepare the appliance before first operation.
How to select temperature, volume, and start dispensing.
How to remove scale buildup.
Instructions for cleaning the water faucet.
Solutions for common operational problems.
Instructions for proper disposal of the appliance.
