What to do if the stirrer stops during operation in Profi Cook PC-ICM 1091 Ice Cream Maker?
If the stirrer stops during operation of your Profi Cook Ice Cream Maker, it's likely because the ice cream has become too hard, activating the motor's protection mechanism. To resolve this, switch off the device, disconnect it from the mains, and remove the ice cream.
Why the compressor does not turn on in my Profi Cook PC-ICM 1091 Ice Cream Maker?
If the icon appears on the display of your Profi Cook Ice Cream Maker, but the compressor doesn't turn on, it indicates that the overheat protection has been triggered. Allow the device to cool down for approximately 30 minutes before attempting to start it again.
What to do if Profi Cook PC-ICM 1091 Ice Cream Maker activates standby mode?
If your Profi Cook Ice Cream Maker activates standby mode before the ice cream preparation is complete, it's likely due to a disconnection in the power supply. To fix this, start the program again and set it for the remaining time needed.
Why is my Profi Cook Ice Cream Maker compressor noisy?
If the compressor in your Profi Cook Ice Cream Maker is noisy, the mains power supply might be too low. Turn off the appliance and check the mains power supply.
Highlights severe risks like damaging the refrigerant circuit or reaching into the rotating stirrer.
Advises on post-transport waiting, liquid expansion, and proper placement to avoid damage.
Details how to switch on, start programs, and pause/cancel operations.
Outlines the steps for using the device to make ice cream and removing it safely.
Lists common problems and their solutions for the ice cream maker.
General| Capacity | 1.5 L |
|---|---|
| Housing material | Plastic |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Preparation time | 30-40 minutes |
| Features | transparent lid |
To Next Page
