What to do if my Profi Cook Blender is not working?
If your Profi Cook Blender isn't working, the rechargeable battery might be empty and needs charging. Alternatively, the battery could be defective, in which case you should contact service or your dealer. Also, ensure the appliance is disconnected from the charging cable and power supply unit during use.
Why does my Profi Cook PC-SM 1237 A shut off and the battery indicator flash?
If the battery status indicator flashes and the Profi Cook Blender switches off, it's likely due to overheating protection being activated. Allow the appliance to cool down for at least 15 minutes before attempting to use it again. Note that charging is also disabled until the appliance cools down.
What to do if my Profi Cook PC-SM 1237 A Blender turns off when only one LED is lit?
If your Profi Cook Blender switches off when only one blue LED is illuminated on the battery status indicator, it means the rechargeable battery has approximately 20% capacity. The appliance is designed to protect against deep discharge, so charge the rechargeable battery.
Why does the Profi Cook PC-SM 1237 A battery not hold a charge?
If the rechargeable battery of your Profi Cook Blender does not hold a charge, it has likely reached the end of its life. Contact service or your dealer.
General| Power | 1200 W |
|---|---|
| Capacity | 1.5 L |
| Material | Stainless Steel |
| Pulse function | Yes |
| Accessories | Measuring cup |
To Next Page