EasyManua.ls Logo

Proficook PC-AE 1069 - Operation Of The Juicer

Proficook PC-AE 1069
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
43
Electric Connection
 
check that the mains voltage to be used
matches that of the device. You can find the
required information on the nameplate.
 
safety socket.
Operation of the Juicer
Switch Settings
• 
 
appliance immediately at the highest speed.
 
high speed respectively.
Which level to select for which fruit?
Please see the following overview to answer this question.
1 1 2 2 2
Tomatoes,
Melons
Plums,
Pears (soft),
Peaches,
Mangoes (peeled),
Kiwis (peeled)
 Cucumber Pineapple (peeled),
Pears (hard),
Carrots,
Celery,
Apples
 
 
 
Extracting Juice
NOTE:
The appliance is intended for short-term use.
Stop the appliance for 1 minute after operating
for 3 minutes.
CAUTION:

-

1. Set the switch to the desired position. The mo-
tor starts running.
2. Insert the fruit pieces in the filler opening and

The tamper has a guideway in the filler open-
ing.
3. The juice flows out at the right side of the cas-
ing. The pulp is collected in the pulp container.
NOTE:
 
to prevent overflowing.
 -
ries, grapes, oranges) are usually not juiced
but pressed.
 
juice content, splashing of juice from the
area of the pomace container may occur. In
this case, we recommend that the pomace
container is emptied more frequently.
Stop Operation And Disassembly
1. Set the control knob to “0” position and wait
until the centrifugal sieve has come to a com-
plete standstill.
2. Disconnect from mains power supply.
3. Take the juice jug to the side and open the
safety bracket.
4. Remove the transparent cover.

Table of Contents

Related product manuals