EasyManua.ls Logo

Proficook PC-TYG 1143 - Troubleshooting; Technical Data

Proficook PC-TYG 1143
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40
CAUTION:
• Do not use any wire brush or other abrasive
objects.
• Do not use any acidic or abrasive detergents.
• Never poor cold water on a hot plate, this
could damage the device and can cause
splashing of hot water.
Thermostat
Please clean the thermostat with a soft paper
towel or a soft dry cloth.
Griddle
• Please remove any food residues while they
are still warm with a damp cloth or paper towel.
• Wipe the griddle (4) with a soft sponge and
soapy water, rinse with clean water, and dry
thoroughly with a soft cloth. After drying, please
apply a thin lm of edible oil to the surface.
Fat collecting Tray
• Remove the fat collecting tray (3) from the ap-
pliance.
• Discard the contents.
• Clean the tray in warm soapy water.
• Reattach the fat collecting tray (3) to the grill
when it is dry.
Bamboo frame
Clean the frame with a slightly damp cloth.
Storage
• Only store the appliance clean and after it has
cooled down.
• During longer periods of non-use we recom-
mend storing the appliance in its original
packaging.
WARNING: Risk of electric shock!
• Always pull out the plug from the mains socket before cleaning and
wait until the unit has cooled down.
• Always store the appliance in a well-ventilated
and dry place out of reach of children.
• Make sure the fat collecting tray (3) is posi-
tioned correctly.
CAUTION:
Before reinserting the thermostat make sure that
the interior of the socket is fully dry.
Troubleshooting
The appliance does not work
Possible cause:
The appliance is not connected to mains power.
Remedy:
• Check the wall outlet with a different appliance.
• Insert the plug properly in the wall outlet.
• Check the fuse.
The temperature is not controlled correctly
Possible cause:
The thermostat is not inserted correctly.
Remedy:
• Insert the thermostat plug properly
Technical Data
Model: ................................................PC-TYG 1143
Power supply: .....................220 - 230 V~, 50/60 Hz
Power consumption: .........................2000 - 2200 W
Protection class: ..................................................... .I
Net weight: .........................................approx. 3,8 kg
The right to make technical and design modica-
tions in the course of continuous product develop-
ment remains reserved.

Table of Contents