39
order to ensure that they do not play with the
device.
Special Safety Instructions for
this Machine
WARNING:
-
ditional parts which move during operation, the
device must be switched off and cut off from
the mains.
knife has stopped.
solidly and securely before switching the
device on.
2 minutes. Allow it to cool for around 1 minute
before using it again.
-
Designated use
This device is used for
Do not use for too hard foodstuffs such as nuts or
chocolate.
It is intended for the use in private households and
similar applications.
It is only to be used as instructed in this user
manual. The appliance is not intended for com-
mercial use.
Any other use shall be considered as not intended
use and can lead to material damage or even
The manufacturer shall not be liable for damages
caused by not intended use.
Supplied parts
1 base device with motor
1 cap for the filler open-
ing
1 lid with filler opening
1 blade block
1 screw mount for
the blade block
Unpacking the appliance
1. Remove the device from its packaging.
2. Remove all packaging materials like foils, filling
materials, cable holders, and carton packaging.
3. Check the scope of deliveries for completeness.
q NOTE:
There may still be dust or production remains on
the device. We recommend that you clean the
device as described under “Cleaning”.
Description of the Parts
1 Fill opening cap
4 Blade block
5 Screw mount for the blade block
6 Drive wheel
7 Base unit with motor
8 Control panel
9 Function indicator lights
Assembly
Assemble the blade block (see Fig A und B)
2. Place the blade block onto the seal on the base
3. Put the screw mount onto the thread on the
4. Left-handed thread! Turn the screw mount
anti-clockwise.
To Next Page
Loading...