22
Technical Data
Diamond cutting disc max. (mm) 180
Blade infeed Ǿ (mm) 22,23
Max. cutting length (mm) 547
Max. diagonal cutting length (mm) 305
Motor: Power (W) 750
Cutting shaft rotation speed (min-1) 2800
Voltage 230 V
Dimensions LxWxH (mm) 580x470x25
Weight (kg) 14,0
General Safety Instructions
CAUTION!
The following safety measures must always be observed when using
power tools:
• Read through the operating instructions carefully and observe all safety
instructions!
• Remove the plug from the wall socket when the machine is not in
operation, before attaching anything to the machine, as well as before
cleaning.
• To protect yourself against an electric shock, ensure that neither the
electrical cable, nor the plug or accessories come into contact with water
or other liquids.
• Do not use the machine in hazardous environments. Do not use the ma-
chine in humid or wet conditions and do not put the machine in the rain.
• Make sure that your work area is dry.
• The machine should not be operated under any circumstances if there is damage to its
electrical cables or plugs, if the machine is not working correctly, if it has fallen over, or
if it has been damaged in any other way.
• The use of accessories which are not supplied or recommended by us may result in
damage (possible re, electric shock, damage to health).
EN
To Next Page
Loading...