29
HOW TO USE
INCOMING CALL:
Lift the handset and start the conversation.
OUTGOING CALL:
Lift the handset. Wait for the dial tone and key-in the desired telephone
number. Replace the handset when the conversation is over.
REDIAL:
In case the person you were calling was busy or you want to dial the
last dialed number again, this number is stored in memory:
1. pick up the handset and wait for the dial tone
2. press the button REDIAL; the last dialed number will be redialed
This number can be as long as 31 digits.
CALL TRANSFER AND NETWORK SERVICES:
Use the R/FLASH-key to activate special services from your tele-
phone-company or to transfer a call in case you are connected through
a PABX. The FLASH time of this feature is 100mS.
TELESERVICES:
The buttons * and # are function buttons, needed for divers telecom-
services (teleshopping, telebanking, etc) or to control divers telecom
devices (PABX, answering machines, etc). Refer to the concerning
manual.
ENGLISH
To Next Page
Loading...
