_1 When you are finished exercising, remove the
key.
Step onto the foot rails and remove the key from
the console. Keep the key ina secure place.
In addition, move the on/off Switch to the off posi-
tion and unplug the power cord. (See the drawing
on page 10.)
THE INFORMATION MODE
To access the information mode, hold down the START/
STOP button while inserting the key into the console.
An "E," for english miles, or
an "M," for metric kilometers,
will appear in the DISTANCE/
LAPS display, if you want to
change the unit of measure-
ment, press the SPEED A
button.
E
D{S]_,NCE LAPS
The TIME/PACE display will
show the total number of
hours the treadmill has been
used.
I12
TIME PACE
PULSE SENSOR TROUBLE-SHOOTING
Make sure to stand on the foot rails and avoid
moving your hands while measuring your head
rate. Excessive movement may interfere with heart
rate readings. If the pulse sensor is not used correctly,
your heart rate will not be shown.
Do not hold the metal contacts too tightly; doing so
may interfere with heart rate readings.
For the most accurate heart rate reading, wait for
about 15 seconds.
For optimal performance of the pulse sensor, keep
the metal contacts clean. The contacts can be
cleaned with a soft cloth--never use alcohol,
abrasives, or chemicals.
The SPEED display will
show the total number of
miles that the walking belt
has moved.
JJp
• i "
, SPE[-D ,
To exit the information mode, remove the key from the
Console.
13
To Next Page
Loading...
