To Next PageTo Next Page
Need help?Do you have a question about the Profoto Air Remote TTL-N and is the answer not in the manual?
General| Timer | - |
|---|---|
| Interface | RF Wireless |
| Compatibility | Z9 Z7 mk.II Z7 Z6 mk.II Z6 D6 D5 D4 D4S D3X D3S D850 D810 D800 Df D780 D750 D700 D500 D610 D600 D300 D7500 D7100 D7000 D5600 D5300 D5200 D3500 D3300 D3200 |
| Maximum range | 300 m |
| Product color | Black |
| Channels quantity | 8 channels |
| Suitable for smartphone | No |
| Mini-USB ports quantity | 1 |
| Battery technology | Alkaline |
Weight and Dimensions| Depth | 40 mm |
|---|---|
| Width | 60 mm |
| Height | 77 mm |
| Weight | 90 g |
General warnings about operating conditions, usage, and product intent.
High voltage hazards, connection requirements, and capacitor discharge safety.
Caution regarding hot parts, modeling lamps, and flash tubes.
Preventing obstruction of ventilation and ensuring proper airflow.
Information on radio frequency emissions and proper system integration.
Environmental guidelines for recycling electronic equipment according to WEEE.
Overview of basic setup and operation steps for Profoto flash systems.
Procedure for switching the remote device on and off.
How to select the radio channel for synchronization.
Explanation of sync settings like 1st and 2nd curtain sync.
Switching between TTL automatic and Manual exposure modes.
Controlling flash output and settings in TTL automatic mode.
Manually adjusting flash output for groups A, B, and C.
Manually transmitting a sync signal to test settings.
Restoring the remote device to its default factory settings.
Monitoring battery status and activating power saving features.
Checking and updating the device's firmware version.
Information on the 2.4 GHz ISM band and regional restrictions.
FCC and Industry Canada compliance statements and conditions.
Details on modular approval for sale and operation in Japan.
